Home > Industries > Construction Contractors

Industry

Construction Contractors

The surface-prep subcontractor that does not slow your bid. EPA Lead-Safe Certified Firm. OSHA-aware planning. ANSI Z136.1-based laser safety practices. You hand us the spec, we hand you a clean substrate and the documentation your GC needs. Use our surface-prep RFP guide and lead-paint removal options guide during preconstruction planning.

The Challenge

Surface preparation is the critical path item on most coating and structural projects. The GC needs a clean substrate before the coating crew, the welding crew, or the inspector can proceed. Traditional blast contractors add days to the schedule: mobilization, containment setup, blasting, cleanup, and disposal. On urban job sites, add permitting time for air quality and noise.

The documentation burden falls on the GC. SSPC cleanliness verification, hazardous waste manifests for lead-bearing blast media, OSHA silica exposure monitoring records, and containment compliance documentation all need to be on file before the next trade can mobilize. A missing document holds the entire schedule.

Laser cleaning can shorten setup by avoiding blast-media delivery, recovery, and blast-media containment. It also avoids silica controls tied to silica-containing abrasives. Removed coatings, captured contaminants, and filters remain subject to project-specific characterization, disposal, and any required waste documentation. Mobilization and next-trade timing depend on site access, safety controls, and the project schedule.

Applications

USE CASE 01

Structural Steel Preparation

Clean beams, columns, connections, and plate before welding or coating in the field. Prepare surfaces for coating without blast rooms or abrasive media. No grinding or blast sparks, with hot-work controls near combustible materials. No silica dust on the job site. Works at height, in confined spaces, and adjacent to occupied areas.

USE CASE 02

Rebar and Embed Preparation

Remove mill scale and rust from reinforcing steel, embed plates, and anchor bolts before concrete placement or epoxy coating. Achieve SA 2.5 cleanliness for maximum adhesion. Laser reaches between rebar layers and around complex embed configurations that blast nozzles cannot access.

USE CASE 03

Lead Paint Substrate Prep

EPA RRP Lead-Safe Certified. Strip lead-bearing coatings from structural steel, concrete, and masonry without triggering full lead abatement protocols. No Class 1A containment. No hazardous blast media disposal. Compliance documentation (LSO report, surface verification, before-and-after photos) included with every job for GC and owner review.

Mobilization time

0 hr

Containment setup

$ 0

Hazardous waste disposal

$ 0

SP-5

Cleanliness achievable

"The certified surface-prep sub your GC and your insurance carrier both already approve. Ready on 48 hours notice across NJ/NY/PA."

Frequently Asked Questions

What credentials do you carry for bidding on commercial projects?

EPA RRP Lead-Safe Certified Firm, ANSI Z136.1 Laser Safety Officer, NY project requirements reviewed before work begins, and full OSHA-aware planning. General liability, commercial auto, inland marine, and workers compensation insurance. Certificate of insurance provided on request. Your GC and your insurance carrier will both approve our coverage without issue.

How fast can you mobilize for a surface prep subcontract?

We carry the laser equipment on one truck, which avoids blast-media delivery coordination and construction of blast-media containment. Mobilization timing depends on location, access, laser safety-zone planning, and any contaminant-specific capture or containment required for the project.

Do you provide SSPC cleanliness documentation?

Yes. Every job includes surface cleanliness verification per SSPC/NACE standards, a Laser Safety Officer report, before-and-after photo documentation, and insurance certificates. The documentation package is designed to satisfy GC, owner, and inspector requirements without follow-up requests.

How does laser surface prep work on an active construction site?

Laser cleaning does not generate a blast-media dust cloud or require blast-media containment. Air, noise, environmental, occupancy, and confined-space requirements remain site- and project-specific. The Class 4 laser requires a controlled laser safety zone, and contaminant-specific source capture or containment may also be required.

Infrastructure

Transport

Restoration

Property & Defense